The AMM - UPCI is available for the following sampling frequencies:
and one digital output:
The AMM - UPCI accepts S/PDIF and AES3 (AES/EBU) signals. The output voltage level is switchable between 0,5Vpp (S/PDIF) and 5Vpp (AES3).
picture shows AMM - UPCI - TOS - 96
The AMM - UPCI is connected between a digital audio transmitter, fe:
and a digital audio receiver, fe:
The AMM - UPCI will strongly attenuate jitter and improve the audio reproduction / recording quality.
There are several jitter attenuation or reclocking products on the market. All of these products suffer from the fact, that you need a cable, in order to connect to the digital receiver (f.e. DA converter). This will introduce new jitter, the cleaned signal will be contaminated again, before it reaches the receiving device.
Direct clock injection has been developed by Altmann Micro Machines, in order to overcome line induced jitter, due to transmission cables.
The AMM - UPCI uses direct clock injection, it is directly plugged into the receiving device with no cable in between. This ensures, that the regenerated and clean signal will reach the receiver without degradation.
The AMM - UPCI will dramatically improve audio reproduction and recording quality, no matter if you use consumer, professional or high-end equipment.
A $99 CD-player used with AMM - UPCI and external DA-converter will give comparable performance to a $10.000,- CD-transport, used with the same DA-converter but without AMM - UPCI (no, its not a joke).
The same applies for DAT and DVD players.
Any high-end CD or DVD-transport used with AMM - UPCI will be drastically improved in sound quality.
Any external DA converter will be drastically improved in sound quality with AMM - UPCI and will be more independent from the quality of the transmitter.
Optical Toslink connections will deliver excellent sound quality (even over long distances), when used with AMM - UPCI.
The AMM - UPCI will improve the sound quality of stand-alone CD-players that have a digital output & input (f.e. Accuphase DP65V).
The AMM - UPCI will improve digital recording quality of an externally clocked AD converter.
The AMM - UPCI will improve the quality of asynchronous sample rate conversions.
The AMM - UPCI can be used to convert between interfaces while attenuating jitter:
Conversions are possible from:
The AMM - UPCI is manufactured by Altmann Micro Machines in Germany and can be ordered by email.
The AMM - UPCI is covered by a 5 years limited guarantee.
The price is EUR 500,- all models except ST optical input (EUR 550,-).
Orders with European shipping addresses are with 14 days money back guarantee excluding shipping costs.
Orders from Germany have 14 days money back guarantee including shipping costs (german oders are freight-free).
Please specify the desired sampling frequency and input / output type.
Text (c) by Charles Altmann